Pepperl+fuchs safety barrier
Time：2014-12-29 15:14:55 Views：21971
Pepperl+fuchs safety barrier originated from Germany. Its safety barrier series include KDF2, KFD0, KCD2, KFU8, etc. Pepperl + Fuchs safety barrier is the core product of Pepperl + fuchs, which is popular in European, American and Asian markets. Shanghai Guilun distributes Pepperl+fuchs for ten years. It is your trusted partner to provide customers with economical and affordable product solutions based on their actual conditions.+86 21 56519159
Pepperl+fuchs safety barrier
|
The P+F safety gate is connected between the intrinsic and non essential circuits. A device that limits the voltage or current of an intrinsically safe circuit to a certain safe range.
|
Two common types of pepperl+fuchs safety barrier
◆P+F security gate ◆P+F Zener gate
P+F safety barrier series
|
K series
The widely used K series intrinsically safe isolation fence is installed with DIN guide rail, which is flexible and convenient. K series intrinsically safe safety grids can be plugged into the power guide rail assembled with DIN track, which is easy to operate. Compared with DIN rail installation, this installation method can greatly save the power supply and wiring of the module power supply terminal.
|
|
H series
The H series intrinsically safe fence adopts motherboard installation. The innovative product is an ideal product to integrate with all DCS systems or systems.
|
|
|
E series
For rack isolation grille, PEPPERL+FUCHS provides a full range of E series continental card safety barrier. There are 3 kinds of European card products to choose from.
|
|
CR series
The CR series safety barrier is installed with DIN guide rail. For the new project, K series isolation barrier is recommended.
|
|
|
WE series
WE series isolation switch amplifiers mainly supply power for NAMUR proximity switches or dry contacts in dangerous environments. The DIN guide rail is installed or directly threaded through the base screw hole. For the new project, K series isolation barrier is recommended.
|
P+F Zener gate series
P+F Zener gate - low cost, easy installation of explosion-proof products
The double plus Zener gate (zener diode safety barrier) can be used for low cost explosion-proof in process control systems. In order to prevent detonation, the energy transmitted to the danger zone is limited to a level that is not safe enough to explode. The products of P + F are suitable for all kinds of installation and flexible wiring. There are mainly two ways to install the DIN guideway and the terminal board. Accessories are complete. The zener gate must be connected to the intrinsically safe place.
|
Z series
Z series Zener gate is equipped with DIN guide rail. Using DIN guide rail, no other wiring is needed to achieve intrinsically safe grounding.
|
|
SB series
The SB series includes single slot SB terminal block or multi slot terminal plate and Zener gate. The SB series products are mounted on the 35mm DIN guide rail.
|
|
|
Typical schematic diagram of pepperl+fuchs safety fence：KFD2-STC4-EX1
|
|
