Pepperl+fuchs liquid level sensor
Time：2013-8-6 9:44:48 Views：16787
Pepperl+fuchs liquid level sensor originated from Germany. Pepperl+fuch occupies a leading position in the industrial control industry, and its products are selling well in Europe, America and Asia. Shanghai Guilun distributes Pepperl+fuch for ten years. It is your trusted partner to provide customers with economical and affordable product solutions based on their actual conditions.+86 21 56519159
Pepperl+fuchs night position sensor
|
Pepperl+fuchs night position sensor can be used in various industrial control systems, such as petrochemical industry, food and beverage industry, building materials industry, metallurgical industry, environmental protection system, water treatment, papermaking, automobile industry and so on. It is used to detect the level of liquid, solid, granular, viscous and powder materials. According to different requirements, the level measurement methods can be divided into two categories: limit value measurement and continuous measurement. These devices are used for explosion-proof O zone and WHG.VBF anti-theft certification.
|
Pepperl+fuchs level controller two main types of measurement
|
Measurement mode
|
Restriction detection
|
Continuous liquid level measurement
|
|
Major product types
|
Float switch
|
Magnetic invasive probe
|
|
Tuning fork type limit switch
|
Hydrostatic sensor
|
|
Conductive limit switch
|
Ultrasonic sensor
|
|
Magnetic invasive probe
|
Microwave guided sensor
|
|
Capacitive limit switch
|
|
Two ways of measuring Double level controller
|
|
|
限制檢測
|
連續液位測量
|
Pepperl+fuchs bit controller limit detection
|
The monitoring switch for overflow or dry operation protection limits switches the signal when the medium reaches the set height, exceeds the set value or falls below the set value. The setting value (VDI/VDE Directive 3519) is based on the installation height.
報錯
|
|
Characteristic:
|
Different measuring principles can be used for over overflow protection, high and low position control and over current protection.
|
Different products can be used in liquid or granular solids to provide products suitable for Ex area and Zone0.
|
|
Examples are:
|
|
Overflow / dry operation protection
|
|
Max min control
|
|
Overflow protection
|
Pepperl+fuchs level controller continuous liquid level measurement
Check the current media level at any time. The liquid level sensor can detect the current immersion height. It is measured by the difference between the dielectric surface and the preset reference height. Continuous liquid level measurement has the functions of utilization evaluation, leakage control and precise flow control (VDI/VDE Directive 3519).
|
|
|
Characteristic:
|
Different measuring principles are used for continuous position control.
|
Output signal 4-20mA or digital signal (Profibus-PA)
|
Products available for Ex regional and Zone0 products are available.
|
