Phoenix surge protector

Phoenix surge protector is a potential interference that causes damage or abnormal functional potential when the permanent availability of equipment or system is in an unstable state. The cost of replacement, maintenance and downtime proves this point.

Surge protection for improving system availability

On the basis of a large number of basic research, Phoenix Electric has developed innovative surge protector technology, and applied the required professional technology to powerful and application-oriented protective equipment.
The product line includes protective devices for power supply equipment, MCR technology, information technology equipment and transceiver systems.

Phoenix surge protector classification：

◆Power Supply
◆MCR system
◆information technology
◆Transceiver system

Surge protection of power supply

A comprehensive concept of surge protection starts with the power system. Instantaneous voltage is extremely dangerous here. This will affect all devices, from input voltage to load. Effective protection is divided into two to three protection levels. This protection can be achieved by using FLASHTRAB, VALVETRAB and PLUGTRAB protectors.

Surge protection for MCR Technology

In MCR technology, a large number of cables connect many interfaces. This creates a particular risk. The surge can be synchronized through each single cable into all the interfaces.

Protect your process

The signal interface is extremely sensitive to surge voltage. In this case, the components of the combined protection circuit have powerful power and quick response. PLUGTRAB products are pluggable and testable protectors can be tested even during system operation.

The selection of surge protectors is based on four different factors.：

◆Signal processing, such as 2, 3 or 4 line system.
◆Maximum voltage signal,
◆Tolerance of surge and
◆Transmission frequency.
◆It is also necessary to consider the working site of surge protector. For example, the protection of intrinsically safe circuits requires special needs.

Surge protection for information technology

The importance of preventing information technology systems from being damaged by hackers and viruses and physical impact on hardware is increasing. Moreover, the smooth transmission of data depends entirely on the effectiveness of the EDP system.

Communication through data networks is part of the company's all day business. The frequency of sensitive interfaces with low signal level is high. Surge voltage can lead to sudden large scale paralysis of data transmission system. DATATRAB protector limits the surge voltage to a safe value without distorting or weakening the data signal.

Surge protection for transceiver system

The antenna cable stretching across the back of the building and the antenna itself are usually very long and directly exposed to the air. The instantaneous voltage will be coupled to these cables to damage the transceiver system and buildings.

Protect your communication

High frequency requirements for wireless transmission require low pass attenuation for protection devices. Typical protectors suitable for this range are equipped with gas discharge tubes or Lambda/4 technology. This requirement is consistent with COAXTRAB. The product range provides a coaxial mounted protector for all current transmission systems.